Xiaomi apple homekit


Xiaomi и HomeKit запуск одной командой через Сири

Платформа умного дома от Яндекса позволяет управлять розетками, лампочками, телевизорами и другими бытовыми приборами.

Как бесплатно слушать радио онлайн в Яндекс.Станции, Irbis A и Dexp Smartbox. Полный список всех FM радиостанций.

Как слушать аудиокниги онлайн бесплатно на компьютере, на Android и iPhone, и на умных колонках Яндекс.Станция, Irbis A и Dexp Smartbox.

Как настроить запуск двигателя голосом в приложении СтарЛайн через Быстрые команды Сири.

Как смотреть телевизор онлайн бесплатно, через мобильное приложение и на Яндекс.Станции.

Как связать умные устройства от Сяоми с устройствами с поддержкой HomeKit в один сценарий с помощью Быстрых команд Siri Shortcuts.

voiceapp.ru

Как подключить умные штуки Xiaomi к HomeKit без костылей

Производители умных штук начали обращать внимание на систему управления умным домом HomeKit от Apple.

Всё чаще они встраивают поддержку системы из коробки, а некоторые выпускают специальные хабы-переходники, чтобы подружить девайсы между собой.

Не осталась в стороне компания Xiaomi, в этом году китайцы обновили шлюз управления своими гаджетами, добавив в него поддержку HomeKit.

Что понадобится для простого подключения

Для того, чтобы без проблем добавить умные штуки Xiaomi в систему управления умным домом от Apple потребуется специальный хаб.

Обновленная версия центра управления от Aqara сама интегрируется в HomeKit и тянет за собой подключенные девайсы.

Кроме этого понадобятся совместимые с хабом умные штуки, но об этом ниже.

Как добавлять умные гаджеты в HomeKit

1. Для начала устанавливаем приложение Aqara Home из App Store. Это – альтернативная система управления умным домом, из которой можно осуществлять управление хабом и подключенными к нему устройствами.

Приложение потребуется для первого подключения хаба к смартфону и обновления прошивки. В дальнейшем апдейты можно будет производить через приложение от Xiaomi.

2. После обновления прошивки хаб следует добавить в приложении Mi Home.

Сразу после этого в программе Дом на iPhone появится пара устройств: светильник и сигнализация. В качестве светильника с регулируемой яркостью и цветом свечения выступает подсветка хаба, а сигнализация – это один из вариантов автоматизации.

3. Теперь нужно подключить к хабу имеющиеся умные устройства и датчики.

Каждый добавляемый датчик автоматически прокидывается в HomeKit и появляется в приложении Дом. Никаких дополнительных действий не потребуется.

Базовые настройки задаются в приложении Apple, а продвинутые параметры и сложные сценарии автоматизации остаются в Mi Home.

Какие устройства Xiaomi поддерживаются

К сожалению, подключить абсолютно все устройства из приложения Mi Home к HomeKit не получится.

Возможно, в следующих обновления ПО китайцы и добавят такую возможность, но пока получится добавить такие устройства:

Поддерживаются практически все актуальные устройства данных производителей, которые работают по протоколу ZigBee.

В тему: вот так можно добавить другие устройства Xiaomi в HomeKit

Неподдерживаемыми устройствами можно запросто управлять при помощи Siri и без хаба Aqara.

Что еще умеет хаб Aqara

Устройство поддерживает до 30 подключенных датчиков, выключателей и гаджетов, сам хаб может выступать в роли ночника. Подсветка настраивается в приложении и активируется по таймеру либо через другой девайс.

Хаб можно использовать в качестве дверного звонка. Просто подключаем любую совместимую кнопку или выключатель, и система оповещения готова.

А еще девайс может стать сигнализацией, срабатывая при помощи любого из подключенных датчиков.

Покупать новый хаб или нет

В любом случае новый хаб от Aqara выглядит перспективно, ведь уже сейчас можно легко интегрировать в систему умного дома датчики, розетки, выключатели и прочие умные штуки.

Аналоги с поддержкой HomeKit из коробки стоят в несколько раз дороже.

Мы же при помощи одного устройства заводим в систему большинство необходимых девайсов, получая возможность управлять ими как через приложение Дом, так и через родное ПО.

На данный момент хаб имеет всего один недостаток – китайскую вилку для подключения, но вы же уже знаете, как это исправить.

Купить Aqara Hub For Apple Homeki на AliExpress – от 2 768 руб.

Рейтинг поста:

(2.94 из 5, оценили: 18) 🤓 Хочешь больше? Подпишись на наш Telegramнаш Telegram. ... и не забывай читать наш Facebook и Twitter 🍒

В закладки

Разбираемся, как включить умный дом Xiaomi в экосистему Apple.
  • iOS,
  • iPhone,
  • Xiaomi,
  • гаджеты,
  • умный дом
@artyomsurovtsev

Люблю технологии и все, что с ними связано. Верю, что величайшие открытия человечества еще впереди!

Page 2

Производители умных штук начали обращать внимание на систему управления умным домом HomeKit от Apple.

Всё чаще они встраивают поддержку системы из коробки, а некоторые выпускают специальные хабы-переходники, чтобы подружить девайсы между собой.

Не осталась в стороне компания Xiaomi, в этом году китайцы обновили шлюз управления своими гаджетами, добавив в него поддержку HomeKit.

Что понадобится для простого подключения

Для того, чтобы без проблем добавить умные штуки Xiaomi в систему управления умным домом от Apple потребуется специальный хаб.

Обновленная версия центра управления от Aqara сама интегрируется в HomeKit и тянет за собой подключенные девайсы.

Кроме этого понадобятся совместимые с хабом умные штуки, но об этом ниже.

Как добавлять умные гаджеты в HomeKit

1. Для начала устанавливаем приложение Aqara Home из App Store. Это – альтернативная система управления умным домом, из которой можно осуществлять управление хабом и подключенными к нему устройствами.

Приложение потребуется для первого подключения хаба к смартфону и обновления прошивки. В дальнейшем апдейты можно будет производить через приложение от Xiaomi.

2. После обновления прошивки хаб следует добавить в приложении Mi Home.

Сразу после этого в программе Дом на iPhone появится пара устройств: светильник и сигнализация. В качестве светильника с регулируемой яркостью и цветом свечения выступает подсветка хаба, а сигнализация – это один из вариантов автоматизации.

3. Теперь нужно подключить к хабу имеющиеся умные устройства и датчики.

Каждый добавляемый датчик автоматически прокидывается в HomeKit и появляется в приложении Дом. Никаких дополнительных действий не потребуется.

Базовые настройки задаются в приложении Apple, а продвинутые параметры и сложные сценарии автоматизации остаются в Mi Home.

Какие устройства Xiaomi поддерживаются

К сожалению, подключить абсолютно все устройства из приложения Mi Home к HomeKit не получится.

Возможно, в следующих обновления ПО китайцы и добавят такую возможность, но пока получится добавить такие устройства:

Поддерживаются практически все актуальные устройства данных производителей, которые работают по протоколу ZigBee.

В тему: вот так можно добавить другие устройства Xiaomi в HomeKit

Неподдерживаемыми устройствами можно запросто управлять при помощи Siri и без хаба Aqara.

Что еще умеет хаб Aqara

Устройство поддерживает до 30 подключенных датчиков, выключателей и гаджетов, сам хаб может выступать в роли ночника. Подсветка настраивается в приложении и активируется по таймеру либо через другой девайс.

Хаб можно использовать в качестве дверного звонка. Просто подключаем любую совместимую кнопку или выключатель, и система оповещения готова.

А еще девайс может стать сигнализацией, срабатывая при помощи любого из подключенных датчиков.

Покупать новый хаб или нет

В любом случае новый хаб от Aqara выглядит перспективно, ведь уже сейчас можно легко интегрировать в систему умного дома датчики, розетки, выключатели и прочие умные штуки.

Аналоги с поддержкой HomeKit из коробки стоят в несколько раз дороже.

Мы же при помощи одного устройства заводим в систему большинство необходимых девайсов, получая возможность управлять ими как через приложение Дом, так и через родное ПО.

На данный момент хаб имеет всего один недостаток – китайскую вилку для подключения, но вы же уже знаете, как это исправить.

Купить Aqara Hub For Apple Homeki на AliExpress – от 2 768 руб.

Рейтинг поста:

(2.94 из 5, оценили: 18) 🤓 Хочешь больше? Подпишись на наш Telegramнаш Telegram. ... и не забывай читать наш Facebook и Twitter 🍒

В закладки

Разбираемся, как включить умный дом Xiaomi в экосистему Apple.
  • iOS,
  • iPhone,
  • Xiaomi,
  • гаджеты,
  • умный дом
@artyomsurovtsev

Люблю технологии и все, что с ними связано. Верю, что величайшие открытия человечества еще впереди!

www.iphones.ru

Link Xiaomi Mi Home & Yeelight smart home devices to Apple Homekit using Raspberry Pi

HomeKit is Apple’s framework for smart home devices. Users can control their connected accessories using the Home app on their iPhone, even via Siri. However, homekit enabled products are way overpriced. For example, D-Link’s homekit verified “The Guardian” series camera costs $199, compare to Xiaomi’s dome camera which has similar specs and functions priced at $70.

Xiaomi does have limited official support for Apple Homekit. However, you are required to have a Xiaomi router with HDD built in, and the plugin is reportedly unstable. Luckily Xiaomi does provide their API for everyone to use. So we can run a program called homebridge(project github here) on raspberry pi to send the command to Xiaomi devices. Your raspberry pi serves as a “bridge” or a “hub” between Homekit and your Xiaomi devices. There are many homebridge scripts available for Xiaomi devices. I’ll only install homebridge-aqara & Yeelight which only supports yeelight and devices using Xiaomi Mi Home ZigBee gateway. There are scripts out there for other xiaomi smart home devices like robot vacuum. You can find them on here.

Get Started:

Step 1. Make sure you have SSH access to your Raspberry Pi.

Step 2. Install node.js

​sudo apt-get update

curl -sL https://deb.nodesource.com/setup_6.x | sudo -E bash –

sudo apt-get install -y nodejs

sudo apt-get install -y build-essential

Step 3. Install avahi

sudo apt-get install libavahi-compat-libdnssd-dev

Step 3.5. Try step 4. first! If console returned npm command not found, run the following script:

sudo apt-get install npm

Step 4. Install Homebridge

sudo npm install -g –unsafe-perm homebridge

Step 5. Install homebridge-aqara/yeelight

sudo npm install -g homebridge-aqara

sudo npm install -g homebridge-yeelight

Step 6. Create config.json

cd ~

mkdir .homebridge

nano .homebridge/config.json

Step 7. Change config.json

The name is the bridge name shown in Home app. You don’t have to change the username and the port. The pin is your homekit passcode for the bridge.

You can find “sid” and “password” in Mi Home app on your phone.

Open Mi Home app, click on your gateway.

Click the ” ··· ” icon on the top right corner to enter the settings page.

Click About

Tap the software version about five times till the additional options “local area network communication protocol” and “gateway information” show up. Now you entered the developer mode.

Click on the forth line “local area network communication protocol”

Switch on the first button. The second line is your API password. Copy your password then click OK. Now go back to the upper menu, then click on “gateway information”.

You should see a screen like this. Copy and paste the MAC address and rewrite it in lowercases without colons. For example, the MAC address in the picture should be rewritten as a00f60ea1699 in the json config.

After fill in all the information in config.json, use Ctrl+O to save the file, then use Ctrl+x to exit the editor.

{

“bridge”: {

“name”: “RaspBridge”,

“username”: “00:00:00:00:00:0E”,

“port”: 51826,

“pin”: “000-00-000”

},

“platforms”: [{

“platform”: “AqaraPlatform”,

“sid”: [“MAC address for your Mi Home gateway, lowercases only without colon”],

“password”: [“API Password for your Mi Home gateway”]

}]

}

If you have Yeelight devices, you need to open the Yeelight app on your phone. Then enter the device you wish to control from HomeKit, and open Developer Mode in device settings.

Step 9. Install Cron

sudo apt-get install gnome-schedule

Step 10. Configure Cron

crontab -e

Then add

@reboot homebridge &

at the bottom of the file.

Step 8. Run Homebridge

homebridge

If you see a screen looks like this, you are now successfully linked Mi Home gateway to Apple HomeKit. Now go on your phone and open Home app. RaspBridge should show up when you try to add a new accessory.

saku.me

Xiaomi and HomeKit

Dec 29, 2017 · 5 min read

Xiaomi Starter Kit (image via Smart-Home Hobby)

I’ve been building my smart home over the last few years and was in the market to add sensors everywhere in an effort to improve the automations that I was able to achieve.

I previously had a couple of Philips Hue Motion sensors, and Elgato Eve Door & Window sensors, but at £35 a piece, adding these to all rooms and door would get very expensive. I was introduced to the Xiaomi ecosystem and decided to give it a try. Interestingly this is the first time that I’ve opted to buy some non native devices and rely on Homebridge for the integration. Prior to this, I’ve used HomeBridge as a way to integrate tech that I already owned.

Purchase

I got all of my kit from a site called Lightinthebox.com. This was the only site that I found that shipped to the UK and had a wide range stocked. I initially opted for:

  • Door and Window sensor x5 (currently £6.13 each)
  • Gateway (currently £17.88)

I was that impressed with the kit that I purchased some more:

One thing to note is that the website quoted 5–8 days for shipping — this was actually more like 19, but for the price I can’t really complain.

Setup

The setup was fairly trivial. I did however need to upgrade my version of node running on my RPi3 to work with the plugin. As to not waste countless hours in node dependency hell, I’d recommend a fresh install of everything. I took a copy of my config.json file, made a note of installed plugins and completely wiped my SD card.

Follow these steps to get going (this assumes you’re on an iPhone, running iOS 11 or later)

  • Download the MiHome app and setup the gateway and configure your accessories. It doesn’t really matter what rooms the devices are placed in.
  • Open the MiHome app, tap on the gateway, then tap on the 3 dots in the top right corner.
  • Select about and then repeatedly (and quickly) tap on the blank space until three additional menu options in Chinese appear.
  • Tap the second option. This allows you to turn on local access mode. A password should appear. Make a note as you’ll need that soon.
  • Tap back and select the 3rd option. Make a note of the MAC address of the gateway. There’s a couple listed, one of the router that the gateway is connected to and one for the gateway itself. If it’s unclear which is which, try both. (If you run homebridge with the -D flag, you’ll get debug info which will let you know if you’ve connected to the gateway correctly).
  • Install the homebridge-mi-aqara plugin and input the MAC and password from the steps above into your config.json file.
  • Restart HomeBridge and your accessories should now appear.

Usage

The first thing to note is how tiny the door sensors are. Here’s an image with the Elgato Eve as a comparison. Due to the size of the Eve device and the trim around my doors, I’ve had to be creative with how I mount it.

Xiaomi (left) vs Elgato Eve (right) door sensors

The second thing to note is how quickly these sensors update within HomeKit — unscientifically I’d say this is instant. Even with the latest firmware the Elgato sensors still have a slight delay if that haven’t been triggered for a period of time. This still makes them unsuitable for certain automations, where you need a light to turn on immediately for example.

Xiaomi door sensors in HomeKit

The door sensors show up as regular sensors, along with three other accessories from the gateway; a light sensor, multi colour light and a switch. The light actually makes a pretty decent nightlight, especially as you don’t need to physically connect it to a router.

I’ve got a couple of automations setup where I use a door sensor in combination with a motion sensor to detect if somebody is entering or leaving a room. To do this I have a motion sensor on each side of the door and then use the motion as a conditional rule. For example, I want to turn on a table lamp in my daughters room when the door opens, but only between 5am and 8am. This assumes that I’m going in to her room when she is awake and that I want the light to come on with a soft glow. It also assumes that if I’m already in the room and leave during that window that I don’t want to like to come on (if for example she actually isn’t awake, or she settles back to sleep). To do this, I have a motion sensor on the landing and in her room (via a D Link Omna camera) with a rule stating that the lamp should only come on when there is motion detected on the landing. If there is motion on the landing then I must be outside of the room, therefore entering. If there’s motion in the room, then I’m leaving so the rule doesn’t trigger again.

To get the extra option I used the Elgato Eve app. Firstly setup the basic automation rules in the Apple Home app, and then add the condition using Eve.

So far, I’m really impressed with the Xiaomi system and would certainly consider adding more devices (although you can only add 30 per gateway) to my setup.

medium.com

Xiaomi Aqara now compatible with Apple Homekit, new Vibration Sensor and Honeywell Natural Gas Detector • DIY Projects

The Aqara products becomes officially compatible with Apple’s Homekit home automation solution. Two new sensors come to enlarge the Xiaomi Aqara family. First of all the Vibration Sensor which allows to protect valuables by detecting a displacement. It can also be used to detect the opening of a door or drawer more easily than with the magnetic contactor. The Honeywell family dedicated to safety is also expanding with the addition of a sensor dedicated to the detection of natural gas.

For the moment, all these new products are not yet supported by the Zigbee2mqtt project whose official list is here.

The new Aqara accessories bridge adds compatibility with the Apple HomeKit home automation solution and the Home app for iOS and soon macOS. If you already have a Xiaomi gateway, you will unfortunately have to buy a new one. I updated mine to version 1.4.1_157.0143 without success. Aqara accessories remain desperately invisible to HomeKit. This is really a pity especially since nothing else has changed as you can see in this picture. So be careful when buying your bridge. As usual, the labels look more like a keyword stuffing …

The gateway now seems to speak languages other than Chinese (or at least it speaks English now) as shown in this video demonstration by mac4ever. In this video presentation, the bridge is very clearly expressed in English.

In the meantime, if you do not like being stuck on a bridge, you can turn to the Zigbee2mqtt project that allows you to hack Zigbee communication and do without the official gateway. Combined with the Homekit plugin under Node-RED, it is (really) very easy to make compatible all home accessories Aqara and Mijia with Homekit.

Sign that the Aqara home automation products will soon be officially available out of China, the gateway now has most certifications including CE and FCC.

Xiaomi added a gyroscope to her connected button. His gives a hybrid solution to the path of the Magic Cube. The Wireless Switch recognizes 4 different actions. Click, double click, click long and react when shaking.

Until now, it was necessary to be satisfied with the Aqara door or window magnetic switch to detect the opening of other opening. For example, a drawer, the door of the fridge, the freezer, a safe, the door of a cabinet or wine cellar. Problems with metal surfaces or in the presence of a magnet could make it more difficult to install the sensor. The new sensor Xiaomi Aqara Vibration Sensor corrects the problem by using an accelerometer that can detect vibrations and deduce an opening or displacement. The sensor operates using a 3V CR2032 lithium battery. The lifetime announced by Xiaomi is 2 years. Of course, the life will depend on the object protected or monitored by the sensor. A table of great value moves a little less than the fridge door 🙂

The sensor is not yet supported by the project Zigbee2mqtt but given the speed with which the list expands, it should not delay.

The Xiaomi Mijia Honeywell Gas Alarm completes the family of home security sensors. We already knew the smoke detector, it is able to detect the presence of natural gas (methane) in the atmosphere. It can for example be installed in a kitchen equipped with a stove or a boiler fueled by natural gas. The official documentation is here

Be careful, just like the Xiaomi Mijia Honeywell smoke detector, this detector is not CE and FCC certified. It is reserved for the Chinese domestic market. It is possible to buy and use it outside China only if it complements a certified sensor that already equips your home. Attention, this sensor detects only the presence of methane in the air. It does not work with other gases (propane, butane ..)

Like other new Xiaomi, it will still wait a little for support by Zigbee2mqtt.

If you need Aqara home automation equipment, it’s time to equip yourself. The vast majority of accessories are on sale at the moment.

diyprojects.io

Opinion: Should Apple follow Xiaomi, and start building more smart home devices on its own?

Apple’s HomeKit seemed to be the star of the show at the Consumer Electronics Show this year, with a wide range of home-based gadgets — TVs, ceiling fans, outdoor sensors, light panels, a screen-based hub, 4K security cameras, thermostats and more — making headlines.

The HomeKit ecosystem is growing, and it looks like prices may even begin inching downward as well — but that’s not enough, and not fast enough either. As Bradley Chambers wrote in an opinion piece, Apple is leaving a lot of potential on the table by relying solely on third parties to create home-based gadgets.

Amazon’s Alexa and Google Assistant have been hits in the US market, and both are arguably branded and marketed much better than HomeKit, which doesn’t exactly roll off the tongue. Alexa is so culturally entrenched that she’s mocked on Saturday Night Live; “HomeKit” is rarely uttered outside of tech circles.

Aside from branding, there’s also the issue of customer expectations. HomeKit devices are made by a number of different companies with different apps, set-up processes, and maintenance routines. Yes, they can all eventually be found in the Home app, but there’s plenty of room for improvement. Apple is the company that made it easy to use a computer, the company that allowed a regular mom or dad to set up a wireless router at home — it’s just not there yet with HomeKit, at least for non-tech savvy folks.

Bradley wrote out a few ideas for addressing the issue:

If I was in charge of HomeKit at Apple, my first priority would be expanding the products that work with HomeKit. I’d figure out the hold up with manufacturers, and encourage HomeKit support (with the promise of co-marketing resources). If Apple can’t get a doorbell company on board, then they need to build their own.

This isn’t pie-in-the-sky stuff — there is a real-life example of a company doing exactly this: Xiaomi.

Xiaomi (pronounced SHAO-ME) is still primarily known globally for making beautiful smartphone hardware and selling it to the masses at an affordable price. Its charismatic CEO, Lei Jun, loved it when media compared Xiaomi to Apple and him to Steve Jobs, even wearing a black shirt, jeans, and sneakers on stage during product introductions. But while Xiaomi once shamelessly followed Apple, in some ways it’s now pulling ahead.

I was in a Mi Home shop a couple of weeks ago when I was visiting Shanghai, and it was nothing like I had expected. The shop, one of more than 100 Mi Home stores across China, is a showcase of technology products with nary a phone or tablet in sight. Instead, the shop featured a wide range of household products, all carrying the Xiaomi logo.

Lei Jun has his detractors, and he deserves ridicule for ripping off Apple’s ideas and re-purposing them in China. But Lei and his team deserve some credit for spotting an opportunity in the smart home market and then aggressively going after it.

Xiaomi’s smart home is controlled by an app on iOS and Android called “Mi Home”. Like with HomeKit or Alexa, products compatible with Mi Home are relatively straightforward to set up. The key difference with Apple and HomeKit, though, is that Xiaomi pushed the market forward itself by investing real money in a range of products that has made Xiaomi a fast leader in the smart home market in China, with sales on the rise in several other markets as well.

Here’s a look at just some of the products directly made by Xiaomi or in close cooperation with a partner:

  • Desk Lamp
  • Electronic Toothbrush
  • Smart Bulb
  • Smart Plug
  • Motion-Activated Night Light
  • Scale
  • Security Cameras
  • Refrigerator
  • Washing Machine
  • Vacuum Cleaner
  • Wall Switch
  • Electric Scooter
  • Virtual Reality Headset
  • Fitness Band
  • Air Purifier
  • Water Purifier
  • Fire Alarm
  • Drone
  • Portable Speakers
  • Headphones

You get the idea.

I’m not suggesting Apple make all of these things, or even some of them. But it demonstrates what’s possible when a company is hungry enough to make something a success. Xiaomi’s aggressive manufacturing of smart home products and close cooperation with third parties, even some well-known ones like Honeywell and IKEA, has cemented Mi Home as the preeminent leader in the space in China. In fact, Xiaomi sold 132 million smart home devices in Q3 of 2018, more than any other company in the world. Even so, just 5% of Chinese homes had any smart home devices at all, indicating the sheer size of the potential market.

Xiaomi has also found success with its Xiao Ai (pronounced “SHAO-EYE”) voice assistant. Xiao Ai, which is the best Mandarin-speaking voice assistant on the market by far, is now being used in multiple industries in China, from banking chatbots to airline sales offices.

Apple should never make something just because a lot of people would buy it, of course. Steve Jobs was famously on record, repeatedly, saying the company needed to have a small portfolio of products and remain focused to stay successful. He might not think the same way today, though, when chips aren’t just inside computers anymore — they are everywhere, and whichever company can integrate this vast array of disparate products into a seamless, universal, and delightful experience could have a built-in advantage for a generation or more.

Siri was miraculous when it was unveiled along with the iPhone 4s in 2011, but today she has fallen behind Alexa and Google Assistant. HomeKit, too, has a lot of promise, but should be farther along by now. Apple doesn’t seem to be as hungry, or as determined, as Amazon and Google to go after the market and win it. Microsoft won the computer OS wars, Apple won mobile (at least in terms of profits), and it’s still a jump ball in the smart home and voice assistant games. It would be nice if, this time, Apple ripped a page from Xiaomi’s book: take the challenge seriously, buckle down, and re-capture the competitive spirit that made Apple so successful.

There’s still some time to make HomeKit number one, but it’s running out — fast.

Photo: The Beijinger

Subscribe to 9to5Mac on YouTube for more Apple news:

9to5mac.com


Смотрите также